Ecc83 Tube Signal Expander VST STANDALONE x86 WiN

Date: 8-24-2013 | Type: VST/EXE | Size: 2 MB

Comes with built-in Pre of ECC83 Brightest/Darkest Vacuum Tube coded for perfect ANALOG warmth boost with balanced power mixing capability so user can get accurate sound. It can be used for DAMP/BRIGHT signal. Acoustic Corporation operates under Champian Corporation in Pakistan, all coder’s work/contract based under the corporation.

Tube FM 4 For Nebula

Team MAGNETRiXX | 26 February 2014 | 979 MB

The main bulk of this set ranges from nice compression with tone shaping, to effects where nasty growling distortions are possible (and many can do both). Throw in some oddball robotic ringing effects, and you have a sonic arsenal. Tube FM 4 is a good choice if you need something a little different, from unique dynamic control to total sonic destruction. These effects can be used in many different situations (almost a year after release and some users have reported to me that they are still finding new uses), and each effect can give a wide range of results depending on how they are tweaked. Nebula 3 pro or better is needed for these to work as intended.

STN VM-Tube For Nebula

Team MAGNETRiXX | 25 February 2014 | 123 MB

A pristine tube gain stage. Captured from a boutique VARIABLE MU mastering tube compressor known for it’s smooth boost characteristic. Eight vacuum tubes & custom transformers are behind this finished sound. Great for track, bus, & mastering duties.

STN Military Tube For Nebula

Team MAGNETRiXX | 24 February 2014 | 158 MB

A military grade parallel-triode vacuum tube amplification stage. Captured from a classic American class A topology mic pre. Perfect for coloring individual sources during a mix.

The Bogen MXM K93 Vintage Tube Mixer

EQ Combo for Nebula Pro

Team MAGNETRiXX | 24 February 2014 | 132 MB

The “Bogen MXM K93 Vintage Tube Mixer/EQ Combo For Nebula” is an important part of our “Classic Console Series”, consisting of 44 programs:, all sampled at 96kHz and tested to retain accuracy at 44.1kHz and 48kHz sample rates with the latest version of Nebula3 Pro. The “Bogen MXM K93 Vintage Tube Mixer/EQ Combo For Nebula” faithfully reproduces the line channel, microphone channel, and eq section of the late 50’s, early 60’s classic. This collection sounds amazing on everything, and is particularly wonderful if you are trying to get ‘that’ early tube sound. Think anything from the McCartney Beatles Bass, to 60’s room drums.

MTP Modern Tube Preamp For Nebula 3

Team MAGNETRiXX | 13 February 2014 | 1.2 GB

The ultimate tube preamp !

A real class A Hi-voltage (300v) tube preamplifier hand made in the USA. Warm, smooth and clean, it sounds like no other with it’s three tubes per channel, dual input/output transformers and military-grade controls. Three HPF settings (40hz, 80hz, 120hz) @12dB/oct., -100dB S/N and 130dB of headroom. Very good on every audio source, it gives open, deep and detailed sound with smooth highs during tracking, mixing and mastering.

Tube Booster For Nebula Pro

Team MAGNETRiXX | 10 February 2014 | 17.31 MB

Tube Booster has been created to provide the authentic sound of a valve line driver, or level amplification stage. It is a dynamic program with a complex process for adding a special harmonic saturation with little side effects to frequency spectrum. It has been created to have equal effect at multiple sample rates, and has been pre-edited for Low, Medium, and High amounts of signal drive. Tube Booster can be used at lower levels than the programs for more subtle effects. This can be useful on its own and in combination with VTC programs and consoles, tape machines, and anywhere that the user wishes to impart the vacuum tube harmonic characteristics to their signal chain. It can be added to your rendering chain, used on its own, and used in multiple instances.