Empty 250 v2.0.x WiN MAC

Team R2R | 30.03.2016 | WiN: v2.0.9 + MAC: v2.0.8 |  11.3 MB

PLATFORM: WiN32/64 – VST | MAC: AU/VST/AAX

After months of research and tweaks this reverb, based on the first digital reverb machine (the EMT-250). The EMT-250 is known for the very sweet character of its reverb and is used on a lot of famous recordings. It is the favorite reverb for a lot of award winning engineers. Real EMT-250’s are rare and other solutions for obtaining similar results were expensive or unnecessarily complex – until now! With the release of EMpTy 250 this ear candy becomes affordable for each studio and engineer!. EMpTy 250 is not yet another reverb plugin. The character of its sound is unique and sets it apart from other reverb plugins or dedicated hardware reverbs. EMpTy 250 is now available as a VST plugin and is also available as a patch for the Eventide® H8000 and H7500. The plugin can be used in any DAW software supporting Steinberg®’s VST-format, like for example Nuendo, Cubase, Adobe Audition, Reaper, VSThost etc. and does not need any internal DSP card, external box or dongle or special drivers to function. A demo version, which is fully functional and looks identical to the full version, but inserts noise into the output signal every 15 seconds, is available for evaluation of the reverb. A 5.1 version has also been planned.

Lo-Fi Vintage Clipper v1.0.3 WiN

Team R2R | 28 APril 2023 | 10.0 MB

PLATFORM: WiN64 – VST/VST3/AAX(MODiFiED)

LoFi Vintage Clipper plugin is design to add grit and weight to your mix with two distinctive custom designed saturation algorithms.  Use it to add presence and density to your tracks and control transients like the biggest Mix Engineers! This is a fine tuned clip algorithm designed to limit the transients as happens using a real analogue signal chain and increase the density of your tracks.  Saturation is a special designed algorithm that mimics the behavior of vintage analog equipments like old tape machines and mixing console input/output stage

MP1 Pro v1.0.1 WiN

Team R2R | 28 April 2023 | 111.59 MB

MP1 PRO PROGRAMMABLE TUBE GUITAR AMPLIFIER

The Most Tonally Flexible Guitar Amplification Since the 80’s NOW plugin. MP1 Pro Guitar Amplifier plugin is based on a ADA MP1* preamplifier. MP1 Pro features a Tri-State Voicing selection that allows you to choose between Distortion Tube, Clean Tube, or Solid State virtual circuits. Powered by four EL34 virtual tubes with presence, resonance, volume and power switch in class AB push-pull configuration. MP1 Pro Guitar Amplifier features six different guitar cabinets, four microphone emulations with on/off axis position switch, continuous position and distance knobs. Impulse Loader lets you load up to three third-party impulse responses that you can even blend together using volume, pan, phase, solo and mute controls.

Overdrive Special v1.0.0 WiN

Team R2R | 28 April 2023 | 28.2 MB

Overdrive Special Guitar Amplifier plugin is based on a Overdrive Special By Dumble* schematic #124. Overdrive Special s a two channel amplifier, which includes a clean channel and an “overdrive”channel. The overdrive channel is described as “cascading” from the first channel into, at least, one additional gain stage in the overdrive channel. This means that the clean channel’s tone stack and gain stages will “cascade” into the gain stage of the overdrive channel, causing the clean channel to become “overdriven”. Overdrive Special features a 3-band equalizer and one volume control for both channels, but each channel has its own gain control. The gain controls LEVEL and RATIO interact when the overdrive channel is engaged to allow a harmonic change in gain.

MRH159 v1.0.1 WiN

Team R2R | 28 April 2023 | 29.61 MB

PLATFORM: VST2/VST3/AAX/x64

Mrh159 Brown Sound Guitar Amplifier modelled from a vintage Marshall Super Lead 1959* 100W, one of the most famous amps ever. A Super Lead 100W on top two 4×12 cabs is, still for many players, the ultimate rock guitar rig. With the Mrh159 Brown Sound Guitar Amplifier you can switch to a modded Marshall Super Lead 1959* to achieve the legendary BROWN SOUND. With two channels, the Mrh159 Brown Sound Guitar Amplifier provides the tools to create your desired tone. Channel 1 is voiced for a higher treble response and Channel 2 for a normal response, each channel has two inputs and its own loudness control.

Sound Master v1.0.6 WiN

Team R2R | 28 April 2023 | 25.7MB

PLATFORM: VST/VST3/AAX(MOD)

The Sound Master Custom Tube Guitar Amplifier plugin is born to reproduce in your virtual rig the classic American guitar amplifier sounds. Modeled on a Fender Tone Master* Custom Shop 100-watt hand made and point-to-point wired all-tube head, the Sound Master Custom Tube Guitar Amplifier is a tone lab plugin capable of reproducing classic guitar sounds and beyond.

Plugin Rig v1.2.2 WiN

Team R2R | 28 April 2023 | 31 MB

PLATFORM: VST/VST3/AAX(MOD)

This is a perfect environment for the modern Guitar Player who wants to create and organize his entire guitar Amp and Fx chain in a single plugin. It is also ideal for Music Producers and Audio Engineers in order to save their favorites Nembrini Audio plugin chains and recall them at once. Create NA plugin chains which you can save and recall at your disposal. You can load up to 12 NA plugins in series, drag and drop plugins in any free slot, swap plugins, copy/paste and individually bypass any plugin easily. You can also add a Plugin Rig instance in any Plugin Rig slot, so you can save your favorite default Fx Chain and integrate it with the new Fx in a simple way.