Spark v1.1.1 WiN

TEAM V.R | 05 May 2018 | 166.05 MB

…::: AAX, VST, x86, x64 :::…

Spark is a VST/AU/AAX plugin that models four Marshall® tube amplifiers, four guitar cabinets, four overdrive pedals and a set of the most common spatial effects.

Audio Amplifier Pro 2.2.1 WiN

P2P | 16 September 2019 | 15 MB

You have noticed that the audio is sometimes quite low in volume, requiring you to crank up the volume. You have videos for watching, however the audio levels of the movies are too low, so you need to boost the gain somehow. You have tons of video clips and audio tracks that you want to know is there any easy way to adjust the volume to a standard level. Audio Amplifier Pro adjusts the volume of your audio file or video file. It also allows you to normalize all files to the maximum volume possible without clipping audio track or adjust all files to average volume level. With only several clicks this simple tool bumps the audio up. It would keep the video track unchanged, and the audio will be adjusted with an increase or decrease in volume.

RVXX v1.0.1 Channel Amp

P2P | 28 November 2020 | 127 MB

Aggressive High Gain Amp Simulator

[x64]: VST2, VST3, AAX, AU, Jack Audio App

RVXX is a Two Channel Amp Sim based on an extremely aggressive high gain lunchbox amp with a very big bite, we recreated a tone that gives you the perfect balance for modern Metal. Our new profiling method gets the dynamic you need to feel the power of a tube amp sounding in the next room, amp sims will never be the same after playing RVXX.

Blackice Beta Gamma v1.0.2 WiN

Team R2R | 2021.02.05 | 22.28 MB

PLATFORM: WiN64 – VST/VST3/AAX(MODiFiED)

The most modern bass tones are characterized by a dynamic and complex sound obtained using different tools and recording techniques. For this reason has decided to create the Blackice Beta Gamma Bass Amplifier plugin based on Darkglass Alpha Omega 900 bass guitar head and complete it with a virtual recording chain worthy of the best recording studios. This innovative bass amplifier combines a custom tuned overdrive/distortion circuit, a studio-grade VCA compressor and a flexible six band graphic equalizer.

Voice DC30 v1.0.0 WiN

Team R2R | 15 Mar 2021 | 21.6MB

PLATFORM: WiN64 – VST/VST3/AAX(MODiFiED)

Voice DC30 Custom Valve Guitar Amplifier plugin modeled on a vintage Vox AC30 Top Boost Reverb characterised by it’s “jangly” high-end sound it has become widely recognized by British musicians and others. Voice DC30 Custom Valve is capable of both enchanting clean and raucous overdriven sounds, the signature chime of the Voice DC30 Custom pairs Valve seamlessly the intricacies of your playing style, resulting in a sound that is truly your own. The Voice DC30 has a separate brilliant channel. This has been achieved by adding a gain stage and a ‘cathode follower’ stage, thereby dropping the impedance and bringing up the current and adding Bass/Treble controls to this channel. The brilliant channel with optional top boost is placed after the volume control section and before the phase inverter. This means you can shape the sound after the distortion. The Vib-Trem channel offered a choice between vibrato (wavering pitch) and tremolo (wavering amplitude). A rotary, three position Speed switch adjusted the the rate of modulation.

SCAF v1.01 VST x86 WiN

R2R/MaGeSY® | 19.03.2021 | 3.65 MB

SCAF consists of a filter and an amplifier section. Both can be controlled by any track in your project. The routing between the tracks is done via internal host-independent side chains. The sections are independent so the filter’s cutoff frequency might follow the volume envelope of one track’s signal while an other track conducts the amplifier. You set the start and endpoints for gain and cutoff frequency. So the amp section can work in compressing or expanding mode. And the filter can sweep from low to high frequencies or vice versa while the controlling signals volume rises from zero to full scale.

Stark v1.0.0 WiN MAC

Team R2R | 02 Apr 2019 | WiN: 22.4 MB | OSX: 55.2 MB

PLATFORMS: WiN64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

….:::: Amp Simulator ::::….

STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and a Pedal board. The modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms. What separates STARK from other amp simulators is that the cab, amp and ambience modules are built on Klevgrand’s very own algorithms that doesn’t involve any convolution or FFT analysis. This approach renders a more natural response to dynamics over the whole frequency spectrum, plus the ability to fine-tune each profile in ways that just isn’t possible when using convolving methods.