Custom Valve EQ For Nebula Pro

Team MAGNETRiXX | 18 February 2014 | 104.14 MB

CUSTOM VALVE EQUALIZER is an all-vacuum tube EQ and is one of the most amazing tube EQ’s ever! There are fewer than 50 currently in existence, hand-built by a small, independent engineer. The CVQ has a Low Shelf EQ, Wide Mid EQ, and a High Shelf EQ. Where the Pultec-style program equalizer is among the best sounding designs that use a passive eq and tube make-up gain, The Custom Valve EQ uses the actual tube to alter the frequency spectrum and balance the signal levels. It has a custom output transformer to fully balance the output.

The “CUSTOM VALVE EQUALIZER For Nebula Pro” consists of 12 programs: all sampled at 96kHz and tested to retain accuracy at 44.1kHz and 48kHz sample rates with the latest version of Nebula3 Pro.

The CUSTOM VALVE EQUALIZER For Nebula Pro consists of 12 programs: You will find these in your CDSoundMaster “CVQ” category.

Programs are sampled at 96kHz and are tested to retain accuracy at 44.1kHz and 48kHz sample rates with
the latest version of Nebula3 Pro.

The CUSTOM VALVE EQUALIZER For Nebula Pro contains individual programs for the High band, Low band, Mid band, along with all three bands on a single selector program. You also get two preamp program, and all programs as ‘clean’ program versions with the harmonic distortion removed.

INFO: http://redi.se/dey
Custom Valve EQ For Nebula Pro
https://beelink.pro/13012/Custom-Valve-EQ-For-Nebula-Pro.html