🎵 MaGeSY® R-EVOLUTiON™⭐ ⚡(FAST EDiTiON)⚡

  • Voxengo CurveEQ v3.3 AU VST VST3 MAC OSX-iND
    June 24th, 2014
    Categories: AU, macOS, Voxengo, VST, VST3

    image

    CurveEQ v3.3 AU VST VST3 MAC OSX

    TEAM iND | June 22, 2014 | 128.4 MB

    CurveEQ is a spline equalizer for professional music and audio production applications. CurveEQ shows you the actual filter response you are designing by means of a spline (a smooth curvy line), so you can actually see what the EQ is doing with the sound. This, in turn, allows you to get the best from your mix and your tracks. CurveEQ perfectly suits the needs of mastering, and in some cases CurveEQ is suitable for use as an in-track equalizer.



    Viewed 12125 By Music Producers.


    • VOXENGO PHA-979 v2.4 AU VST VST3 MAC OSX
      June 17th, 2014
      Categories: AU, macOS, Voxengo, VST, VST3

      image

      VOXENGO PHA-979 v2.4 MAC OSX

      P2P | 17 June 2014 | 23.10 MB

      PHA-979 is a professional audio AU and VST plugin which allows you to apply an arbitrary phase shift to sound material. What is meant by the phase shift here is simultaneous shifting of all frequencies across the active frequency range of the signal by the given value in degrees. This is achieved by linear-phase design. PHA-979 is useful during mixing sessions, especially when working with the sound material recorded through an array of microphones. In many cases this allows you to solve various phasing problems arising from the microphone placement chosen during the tracking session. In other cases this process may help you to align drums and other instruments to each other bringing punch and time coherence not attainable by the ordinary time-aligning alone. Beside the phase shifting, PHA-979 features positive and negative time delaying that eliminates the need to move in-track events in the sequencer when doing time alignment over any set of recorded tracks. PHA-979 also provides mid/side channel balance and panning controls that permit you to record stereo microphone pairs into a single stereo track without resorting to dual mono recording (on separate tracks) which usually becomes time-consuming in a further editing.



      Viewed 11651 By Music Producers.


      • Panipulator v2.0 AU VST VST3 RTAS AAX WiN MAC
        May 18th, 2014
        Categories: AAX, AU, macOS, RTAS, VST, VST3, WiNDOWS

        image

        Panipulator v2.0 AU VST VST3 RTAS AAX WiN MAC

        Team Cook | FREE | May 16 2014 | 10.4 MB

        Panipulator gives you four simple controls to let you quickly check your mix in different mono configurations. If you ever plan on your mixes being played beyond your own studio, it’s almost guaranteed that it will play through a system that is configured incorrectly. Panipulator lets you hear what your mix will sound like on these systems and catch the issues that may be hiding in your stereo mix before it is released to the public. Even though you spent considerable time and effort getting your mix to sound amazing on your monitors, there is still one very important question: What will it sound like playing at a theme park? or at the dentists office? or on your old radio? What if they wired one of the speakers backwards?



        Viewed 12326 By Music Producers.

        Tags: , , , , , ,

        • Visualizer v1.11.9 AU VST RTAS AAX VST3 WiN MAC-R2R
          May 10th, 2014
          Categories: AAX, AU, RTAS, VST, VST3

          image

          Visualizer v1.11.9 WiN MAC

          TEAM R2R | 2014.05.09 | WiN: 9.34 MB| MAC: 26.71 MB

          Visualizer is a comprehensive and flexible FFT audio analyser designed to allow access to a full range of audio analysis views via a single resizable interface, using a unique intelligent window system to manage the controls and screen layout.



          Viewed 17941 By Music Producers.

          Tags: , , , , , , ,

          • MOTU Masterworks Collection v1.0.1 AU VST3 RTAS Ked MAC OSX
            April 22nd, 2014
            Categories: AU, macOS, RTAS, VST3

            image

            MOTU Masterworks Collection v1.0.1 MAC OSX

            Team IND – Year 2010 | All in øne package – 486.6 MB unpacked

            AU VST3 RTAS Ked

            NOTE that these Plug-Ins were released in the year 2010, so they won’t work on the newest Mac OS!



            Viewed 16962 By Music Producers.


            • VCA v1.0.1 x86 x64 VST VST3 RTAS WiN-HY2ROG3N
              April 18th, 2014
              Categories: RTAS, VST, VST3, WiNDOWS

              image

              VCA v1.0.1 WiN-HY2ROG3N

              WIN: x86/x64 VST/VST3/RTAS | 2.50 MB

              VCA offer a toolkit for controlling the track level, it can work as a simple Voltage Controlled Amplifier using a control signal in it’s sidechain input. Starting from there you can add functionality like an envelope follower on the control signal, with attack and release ranging from 1ms to 3000ms or an RMS module. The VCA acts only if the control signal is above the set threshold that goes from -80dB to 0dB, above this threshold positive or negative gain, which can be scaled by a specific control, is applied. You can also transform VCA in a complete compressor or expander using its input or its output as control signal for feedback or feedforward compression/expansion.



              Viewed 11053 By Music Producers.


              • WVS NS1 v9.1.3.5 Build 3830 MAC OSX-Xdb
                April 9th, 2014
                Categories: AU, macOS, RTAS, VST, VST3

                image

                WVS NS1 v9.1.3.5 Build 3830 MAC OSX

                TEAM Xdb | 13.09.2012 | 22 MB

                AU/VST/VST3/RTAS – x32/x64

                The most intuitive professional noise suppression plugin ever created, NS1 Noise Suppressor intelligently differentiates between dialog and unwanted noise. Perfect for post production, audio forensics and musical applications alike, NS1 instantly analyzes and adapts to your signal in real-time, bringing the foreground into focus as it eliminates unnecessary background noise. Controlled by a simple single fader, NS1 also features an attenuation meter which shows you just how much overall energy is being removed from your input signal. With NS1, noise suppression is as easy as fading away.



                Viewed 1641 By Music Producers.

                Tags: , , , , ,

                • Voxengo TransGainer v1.6 VST VST3 x86 x64-CHAOS
                  April 4th, 2014
                  Categories: Voxengo, VST, VST3, WiNDOWS

                  image

                  Voxengo TransGainer 1.6 VST VST3 WiN

                  Team CHAOS | April 02 2014 | 22.1 MB

                  TransGainer, an audio plug-in suitable for a wide range of professional music production uses, implements an audio signal envelope adjustment algorithm that reacts on transients rather than on a signal’s loudness level. This algorithm allows you to adjust volume of attack and sustain stages of any sounds you use it on. TransGainer was designed in a way to be suitable for all possible sound sources – be it individual tracks or full mixes. In many cases TransGainer can be used in place of gate and expander plug-ins while delivering a better sound and offering an easier control. Beside that, TransGainer can be used for audio recording restoration/re-mastering purposes and reverb tail modifications with excellent results.



                  Viewed 9827 By Music Producers.


                  • Voxengo TransGainer 1.6 AU VST VST3 MAC OSX
                    April 2nd, 2014
                    Categories: AU, UB, Voxengo, VST, VST3

                    image

                    Voxengo TransGainer 1.6 AU VST VST3 MAC OSX

                    Team Cook | AiR-KyGn | 124.1 MB

                    TransGainer, an audio plug-in suitable for a wide range of professional music production uses, implements an audio signal envelope adjustment algorithm that reacts on transients rather than on a signal’s loudness level. This algorithm allows you to adjust volume of attack and sustain stages of any sounds you use it on. TransGainer was designed in a way to be suitable for all possible sound sources – be it individual tracks or full mixes. In many cases TransGainer can be used in place of gate and expander plug-ins while delivering a better sound and offering an easier control. Beside that, TransGainer can be used for audio recording restoration/re-mastering purposes and reverb tail modifications with excellent results.



                    Viewed 12776 By Music Producers.


                    • WVS Reel ADT AU VST VST3 RTAS MAC OSX-msj
                      March 11th, 2014
                      Categories: AU, macOS, RTAS, VST, VST3

                      image

                      WVS Reel ADT AU VST VST3 RTAS MAC OSX

                      msj | 10.3.2014 | 40.5 MB

                      WVS/Abbey Road Reel ADT is the first plugin to successfully emulate Abbey Road Studios’ pioneering process of Artificial Double Tracking. The effect that would become an integral part of Abbey Road’s signature sound was initially created at the famed studios in the 1960s to meet the needs of some very special clients: The Beatles. Reel ADT puts the magic of that era in your hands within seconds. Using its intuitive controls, you can advance or push back the doubled signal to achieve genuine, lush-sounding delay and pitch variations. You can also drive each of the signals separately to add beautiful tape saturations.



                      Viewed 24033 By Music Producers.

                      Tags: , , , , , , , ,



Lifeless-Pigs-from-GitHub



The web does not work well with Adblock or Ublock Please disable your ad blocker for MaGeSY®.
(You also need to have Javascript Enabled)

🤘🎼🎵♬🎹🎻📯🎷🎺📻🎧😘



Thanks!





MaGeSY®

ಮ್ಯಾಜೆಸ್ಯ್