Drawmer S73 & Drawmer 1973 WiN

Team AudioUTOPiA | Feb 29 2016 | 181 MB

..:: AAX*, VST2, x86, x64 ::..

S73 Intelligent Master Processor / 1973 Multi-Band Compressor

For the mastering engineer, a multi-band compressor is a powerful tool. But as Spiderman’s uncle Ben famously says: with great power comes great responsibility. A multi-band compressor that is not used diligently may create more problems than it solves. This is why we created Drawmer S73 Intelligent Master Processor (IMP).

Tube-Tech PE 1C MAC

UNPACED | 30/06/2010 | 162.12 MB

The Tube-Tech PE 1C is a passive, tube-based equalizer suitable for many different sources ranging from bass drums and guitars to vocals. The equalizer features a Low Frequency section made up of two low shelf filters which can be combined to attenuate and boost at the same time. These filters are actually bit apart in frequency even if they are controlled by the same frequency selector. The High Frequency section has a peak and shelving filter working in parallel, which provides a smooth top end while not getting too bright.The ability to combine the different filters and sections is what gives the PE 1C its characteristic sound and is something which plays a crucial part in explaining the classic Pultec sound.

Tube-Tech PE 1C WiN

TEAM AiR | 10/2010 | 13.21 MB

The Tube-Tech PE 1C is a passive, tube-based equalizer suitable for many different sources ranging from bass drums and guitars to vocals. The equalizer features a Low Frequency section made up of two low shelf filters which can be combined to attenuate and boost at the same time. These filters are actually bit apart in frequency even if they are controlled by the same frequency selector. The High Frequency section has a peak and shelving filter working in parallel, which provides a smooth top end while not getting too bright.The ability to combine the different filters and sections is what gives the PE 1C its characteristic sound and is something which plays a crucial part in explaining the classic Pultec sound.

Weiss EQ1 v2.5.12 WiN

Team R2R | 2021.01.20 | 10 MB

PLATFORM: WiN64 – VST/VST3/AAX(MODiFiED)

There’s a reason Weiss Engineering’s EQ1 has been at the top of the heap since its release in 1996. The EQ1’s dazzling sonic qualities combined with its flexibility as either a Minimum Phase EQ, a Linear Phase EQ, or a Dynamic EQ have made it the must-have digital mastering equalizer. The Weiss EQ1 plug-in crystallizes that legacy—in software form. Weiss Engineering’s go-to hardware and Softube’s workflow and ergonomic advancements combine here to stunning effect. A one-for-one, line-by-line code port of the original, the EQ1 plug-in is the latest and greatest addition to Softube’s successful partnership with Weiss Engineering. EQ1 joins DS1-MK3, MM-1, and more out-of-this-world Weiss + Softube products to prove that Swiss and Swedish engineering make a stellar pair.

ME 1B v2.5.9 WiN

Team R2R | 05 Jan 2021 | 11.5MB

PLATFORM: WiN64 – SSX/VST/VST3/AAX(MODiFiED)

The real battle for getting a clear and vibrant mix is often fought in the midrange frequencies. The Tube-Tech ME 1B is a tube-driven passive equalizer that addresses the midrange—and only the midrange. So gear up, soldier and go, go, go! The ME 1B is Tube-Tech’s unique take on the classic Pultec MEQ-5 midrange equalizer. There’s a lot of mojo going on in the Pultec designs, but the biggest mojo of it is that it is so well-designed that almost whatever setting you use, it will sound good. Just like the Tube-Tech PE 1C “Pultec” Equalizer, the Tube-Tech ME 1B is a passive, tube-based equalizer. It was designed to accompany the PE 1C equalizer, and provide control over the frequencies that the PE 1C cannot adjust. On its own it’s a great tool to shape the midrange of any audio material, and together with the PE 1C it becomes a versatile and full featured equalizer.

PE 1C v2.5.9 WiN

Team R2R | 05 Jan 2021 | 13.7MB

PLATFORM: WiN64 – SSX/VST/VST3/AAX(MODiFiED)

The user interface of the ME 1B is pretty straightforward. You have three different sections, the Low Frequency Peak, Mid Frequency Dip and the High Frequency Peak. The only confusing thing is that the mid section never boosts, but always attenuates the selected frequency. The other two sections, low and high frequency, always boost the frequencies. But as soon as you start to use the ME 1B in conjunction with the Tube-Tech PE 1C ‘Pultec’ Equalizer you’ll find that these equalizers complement each other perfectly.

Classic Channel v2.5.9 WiN

Team R2R | 2021.01.05 | 30.13 MB

PLATFORM: WiN64 – SSX/VST/VST3/AAX(MODiFiED)

The Classic Channel is not your everyday channel strip, with a surgical equalizer and fast bus compressor. The Classic Channel is a vintage style and warm sounding channel strip put together from the most famous and classic Tube-Tech gear: The “Pultec” equalizer PE 1C, the mid-range equalizer ME 1B and the tube driven opto compressor CL 1B.