Protector v2.3.2 WiN MAC

Team R2R | 30 September 2024 | WiN:14.3MB | OSX:49.8MB

PLATFORM: WiN32/64: VST/VST3/AAX | MAC: AU/VST/VST3/AAX

Protector is a 0 dB stereo brickwall limiter with adjustable dynamics response. It will typically find its place on the master bus of your DAW to protect your audio output from overshoot, limit the general volume and improve the perceived loudness, thanks to a very transparent frequency response. Despite its very simple set of controls, it offers a wide range of sounds and it is also suitable as a track limiter for more creative effects such as distortion, pumping or heavy limiting. Its large colorful meters and its custom dynamics histogram provide premium visual feedback and make it the perfect tool to monitor and control the dynamics on your master buss. You can also check in real time the loudness boost obtained with the limiter.

DP Meter Pro v4.3.3 WiN MAC

TEAM R2R | 02 October 2024 | WiN: 28 MB | MAC: 193 MB

PLATFORM: WiN32/64:VST/VST3/AAX | MAC:AU/VST/VST3/AAX

DP Meter Pro (DPMP) is a unique audio analysis tool: it combines very flexible and customizable audio meters with advanced side chaining control capabilities thanks to its MIDI and automation outputs. The metering capabilities of the DPMP plug-in let you control and monitor audio signals exactly the way you want: almost every aspect of the peak, RMS and crest factor meters can be customized. It proposes five different scales by default, including Bob Katz’s popular K-System scales (K-12, K-14, K-20), and you can create your own. Large colored statistics displays following your own scales are included for an overview of a track, while histograms give you a precise measurement of the dynamic range of the track. The graphs show the evolution of the audio envelopes over time, and the mid-side switch lets you verify mono compatibility problems and check the “stereoness” of your audio sources very easily. Whether you are working with mono, stereo or surround tracks, this plug-in will fit into your workflow.

PatchWork v2.70 WiN MAC

Team R2R | 12 September 2024 | WiN: 58MB | MAC: 515MB

WiN32/64 – EXE/VST/VST3/AAX | MacOSX – APP/AU/VST/VST3/AAX

“The virtual patchbay for audio plug-ins”

PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance. It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format (full list below). Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack’s matrix.

Destructor v1.62 WiN MAC

Team R2R | 12 September 2024 | WiN: 32.8MB | OSX: 129.3MB

..: AU, AAX, RTAS, VST3, VST, x86, x64 :..

Destructor is a powerful distortion and amp sim modeling tool capable of simulating any kind of distortion: from harsh digital destruction to smooth compression or guitar amp simulation (works for clean tones too.), and most importantly, yours. It is delivered with hundreds of presets and predefined models, either inspired by existing gear (guitar & bass amps or cabinets, compressors, pedals, tape machines…) or created by our destructive minds. But the plug-in is not limited to these predefined models: all parameters of existing presets are fully editable, which gives you access to an unlimited number of distortion simulations – no need to purchase extra presets or amp models to build your custom tone. Based on a perceptual model rather than on electronic designs or impulse responses, the signal chain is reduced to its bare minimum, simplifying the process of tweaking the tone and making it fit into the mix.

MB-7 Mixer 3 v3.60 WiN MAC

Team R2R | 12 September 2024 | WiN: 66.7MB | MAC: 618.9MB

WiN32/64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix and process them as if they were separate tracks. Each band proposes controls that can be found on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the “stereoness” and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility. The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on each band, pre or post fader. Latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also proposes unique linking and grouping options thanks to our multi-instances technology. You can link bands together within a single instance or between several instances of the plug-in on different tracks. This lets a simple fader control as many bands on as many tracks as you want. This is particularly useful when adjusting the placement or the balance of several

B.C. All Plug-Ins Pack 2024.09 WiN

Team V.R | 12 September 2024 | 398 MB

(Win32/64; AAX*, RTAS, VST3, VST, STANDALONE)

A complete professional digital audio processing environment in a single bundle: the BC PatchWork standalone application and the complete collection of BCs commercial audio plug-ins: a total of 18 plugins, including 6 award-winning unique audio analysis tools, 3 powerful dynamics processors, 4 premium equalizers, and a unique scripting plug-in to build your own effects or virtual instruments.

PatchWork v2.68 WiN

TCD | 06 July 2024 | 179MB

WiN64 – EXE/VST/VST3/AAX

“The virtual patchbay for audio plug-ins”

PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance. It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format (full list below). Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack’s matrix.